Buying guide · Bluetooth turntables

Best Bluetooth turntables

Six record players that send the music to Bluetooth speakers or headphones, picked from the makers’ own spec sheets. First question: will your headphones or speaker share a codec with it?

Every spec and price links to the maker’s own manual, spec page or shop, read on 27 Oct 2026. Shop links are plain links; they may earn us a commission later. How we pick

1 Best overall: automatic, aptX Adaptive, headshell you can swapAudio-Technica AT-LP3XBT Fully automatic
aptX Adaptive, aptX, SBC (manual) · AT-HS3 headshell · switchable preamp
From €329 at Audio-Technica (EU shop), checked 27 Oct 2026See it at Audio-TechnicaAlso at Coolbluebol.com
2 Simplest: press start and walk awayAudio-Technica AT-LP60XBT Fully automatic
aptX, SBC · switchable preamp · 33⅓ and 45
From €199 at Audio-Technica (EU shop), checked 27 Oct 2026See it at Audio-TechnicaAlso at Coolbluebol.com
3 Manual with aptX HDPro-Ject T1 EVO BT Manual
aptX HD · Ortofon OM 10 · Line or Phono out
€499 at Pro-Ject (EU shop), checked 27 Oct 2026See it at Pro-Ject’s shopAlso at bol.comGalaxus
4 Step up: direct drive, aptX Adaptive, removable head shellTechnics SL-40CBT Manual
Direct drive · aptX Adaptive, SBC · Bluetooth 5.4 · AT-VM95C on a removable head shell
£749 at Technics (UK shop), checked 27 Oct 2026See it at Technics (UK)Also at bol.comLDLC
5 For digitising records: USB, and 78s tooAudio-Technica AT-LP120XBT-USB Manual
Direct drive · aptX Adaptive, aptX, SBC · USB · 33⅓, 45, 78
From €399 at Audio-Technica (EU shop), checked 27 Oct 2026See it at Audio-TechnicaAlso at CoolblueLDLC
6 All-in-one: speakers built in, Bluetooth in and outVictrola Eastwood II Speakers built in
Bluetooth in and out · AT-3600LA · 33⅓, 45, 78
$149.99 at Victrola (US shop), checked 27 Oct 2026See it at Victrola (US)Also at bol.com

Bluetooth out, not in

A Bluetooth turntable is a transmitter: it sends the record to a Bluetooth speaker, soundbar or pair of headphones. Don’t count on sending to a phone, TV or laptop: Sony’s footnote says devices with no Bluetooth audio receiver function, “including TVs, smartphones, and computers, cannot receive streams that are sent from your turntable” (Sony).

Some record players work the other way round. Pro-Ject’s Juke Box E1 is a turntable with a “BT receiver” and an amplifier: Bluetooth is one of its inputs, for playing your phone through your speakers (Pro-Ject). Victrola says every Victrola player has Bluetooth input; the Eastwood II (pick 6) is one that sends too, with what Victrola calls Vinyl Stream (Victrola).

  • Out (transmitter)Sends the record to Bluetooth speakers or headphones. All six picks do this.
  • In (receiver)Plays your phone through the record player’s own amplifier or speakers. Pick 6 does this as well.
  • Wired as wellEvery pick also has an RCA output for a stereo or powered speakers, so Bluetooth is never the only way out.

Codecs: what both ends share

Bluetooth squeezes the music with a codec. SBC is the basic one; aptX, aptX HD and aptX Adaptive are Qualcomm’s. A turntable and a pair of headphones use a codec that both of them have, so a turntable’s aptX HD only helps if your headphones or speaker list aptX HD too. Audio-Technica writes that the AT-LP60XBT connects to devices “that support the high-quality Qualcomm aptX audio codec” (Audio-Technica), and Cambridge Audio says its earbuds without aptX HD “fall back to standard aptX when used with a source that supports aptX HD” (Cambridge Audio).

Check your speaker or headphones first. Look up their codec list on the maker’s spec sheet, then pick a turntable that shares the best codec on it. A turntable’s better codec does nothing for headphones that don’t list it.

TurntableBluetoothSBCaptXaptX HDaptX Adaptive
Audio-Technica AT-LP3XBT5.2In the manualYesNot listedYes
Audio-Technica AT-LP60XBT5.0YesYesNot listedEU page only
Pro-Ject T1 EVO BT5.0Not listedNot listedYesNot listed
Technics SL-40CBT5.4YesOnly in the light noteNot listedYes
Audio-Technica AT-LP120XBT-USB5.0YesYesNot listedYes
Victrola Eastwood II5.1, in and outNo codec list published.

As each maker lists it, checked 27 Oct 2026. “Not listed” means the codec isn’t in the maker’s list for that model. Where a maker’s own pages disagree, we show both: Audio-Technica’s European page for the AT-LP60XBT adds aptX Adaptive to the SBC and aptX on its US page and in its manual; the AT-LP3XBT’s manual adds SBC to the two codecs on its product page; the 2020 manual for the AT-LP120XBT-USB lists only aptX and SBC; and the SL-40CBT’s manual lists aptX Adaptive and SBC, while its note on the Bluetooth indicator says it blinks three times for aptX and once for SBC right after it connects (Technics).

Wired too: RCA and the preamp switch

All six have an RCA output. Five have a built-in phono preamp and let you choose the output level: on Line, the turntable plugs into any line input, such as AUX or a pair of powered speakers; on Phono, it needs an amplifier with a phono input or a separate phono preamp. Our speakers for vinyl guide sorts speakers by which of those they need. The Eastwood II lists no switch; its manual labels the RCA socket a line output (Victrola manual).

Bluetooth wants the switch on Line. The manuals for the AT-LP3XBT, SL-40CBT and AT-LP120XBT-USB say to set the preamp switch to LINE for Bluetooth, and when the SL-40CBT’s Bluetooth function doesn’t work, its manual’s first check is whether that switch is set to PHONO. If you planned to run the cable into an outboard phono preamp, which needs the Phono setting, read the manual before relying on both at once. And with wired speakers left on, Audio-Technica says the sound plays from both the wired equipment and the Bluetooth device (Audio-Technica).

TurntableWired outputBuilt-in preampFor Bluetooth, the manual says
Audio-Technica AT-LP3XBTRCA, ground wireSwitchable, 36 dBSet it to LINE
Audio-Technica AT-LP60XBTRCA (3.5 mm cable)Switchable, 36 dBThe manual doesn’t say
Pro-Ject T1 EVO BTRCA, Line or PhonoLine or Phono OUT, 34 dBThe manual doesn’t say
Technics SL-40CBTRCA, separate Phono and LineSwitchable, 36.5 dBSet it to LINE
Audio-Technica AT-LP120XBT-USBRCA, ground wire; USBSwitchable, 36 dBSet it to LINE
Victrola Eastwood IIRCA, headphonesBuilt in; no switch listedNo Phono/Line switch listed

From each maker’s spec sheet and manual, checked 27 Oct 2026. Output levels and gain are as published, under each pick.

Cartridge and stylus: what you can replace

All six use a moving-magnet cartridge, the common kind. The stylus is the part that wears; Audio-Technica’s rule of thumb is to replace it after 400 hours of use (Audio-Technica). Beyond the stylus, the picks differ in what you can change:

  • Stylus onlyThe AT-LP60XBT: Audio-Technica calls its cartridge integral. Pick 2.
  • The cartridgeThe T1 EVO BT takes any cartridge with half-inch mounting holes, says Pro-Ject; the headshell is part of the arm. Pick 3.
  • A whole headshellUnlock it and fit another, so a second cartridge can wait on its own headshell. Picks 1, 4 and 5.

The AT-LP3XBT and AT-LP120XBT-USB take any stylus in Audio-Technica’s VM95 Series, which the maker describes as “a wide choice of options for every budget and application” (Audio-Technica). The SL-40CBT comes with an AT-VM95C, like the AT-LP3XBT; its manual names the AT-VMN95C as the replacement stylus and, because the arm height can’t be adjusted, the AT-VM95C for a new cartridge. Victrola doesn’t say whether the Eastwood II’s cartridge can be changed.

TurntableCartridgeReplacement stylusYou can swap
Audio-Technica AT-LP3XBTAT-VM95C (dual moving magnet)VM95 SeriesHeadshell (AT-HS3)
Audio-Technica AT-LP60XBTDual Moving Magnet (AT3600L)ATN3600LCStylus only
Pro-Ject T1 EVO BTOrtofon OM 10 (moving magnet)Stylus OM 10Cartridge (half-inch mount)
Technics SL-40CBTAT-VM95C (moving magnet)AT-VMN95CHead shell (AT-VM95C advised)
Audio-Technica AT-LP120XBT-USBAT-VM95E (dual moving magnet)AT-VMN95E (VM95 Series)Headshell (AT-HS6)
Victrola Eastwood IIAT-3600LA (moving magnet)ATN3600Lnot published

As each maker publishes it, checked 27 Oct 2026. The Eastwood II’s stylus is from Victrola’s stylus guide.

Automatic or manual, speeds and USB

  • Fully automatic: picks 1 and 2. Press Start and the arm plays the record; at the end, “the tonearm will automatically return to the tonearm rest”, says the AT-LP60XBT’s manual (Audio-Technica).
  • Manual: picks 3, 4 and 5. You lower and lift the arm with a lift or cue lever. The Eastwood II’s manual also shows a lift lever, plus an auto-stop switch for the platter.
  • 78 rpm: the AT-LP120XBT-USB and the Eastwood II list it; the others play 33⅓ and 45.
  • USB: only the AT-LP120XBT-USB, at 16-bit and 44.1 or 48 kHz. Audio-Technica says the USB cable connects to a computer “without need for special drivers” (Audio-Technica). For any other turntable, a phono preamp with USB does the same job: see the ART USB Phono Plus PS in our phono preamps guide.
  • Dust cover: all six list one.

The picks in detail

Each pick says what it suits and what to watch for, using only the published specs below it. Where a maker doesn’t publish a spec, we say so rather than fill it in.

Pick 1 · Best overall: automatic, aptX Adaptive, headshell you can swap

Audio-Technica AT-LP3XBT

Fully automatic

Still fully automatic, but with aptX Adaptive, Bluetooth 5.2 and a removable headshell carrying an AT-VM95C cartridge, so you can fit any VM95 stylus or another cartridge later. The RCA cable has a ground wire for amplifiers with a phono input.

Price on the maker’s shop: From €329 at Audio-Technica (EU shop), checked 27 Oct 2026. Prices change; the shop shows today’s.

illustration, not a photo
Drawing, not a photo: we found no photo of the Audio-Technica AT-LP3XBT with a license that allows reuse.

Why it suits this setup

  • Fully automatic, like the AT-LP60XBT, plus a hydraulically damped lift control for starting mid-record by hand.
  • aptX Adaptive and aptX over Bluetooth 5.2, with SBC as well in the manual’s spec table.
  • The AT-VM95C cartridge takes any VM95 Series stylus, and it sits on a removable AT-HS3 universal headshell, so the cartridge can be changed too.
  • Built-in phono preamp with a PHONO/LINE switch, and an RCA cable with a ground wire in the box.

Watch out for

  • The product page lists aptX Adaptive and aptX; the manual’s spec table adds SBC. We show both.
  • For Bluetooth the manual says to set the preamp switch to LINE, the setting for powered speakers or an AUX input, not the one for an outboard phono preamp.
  • Only 33⅓ and 45 rpm, and no USB.
  • Bigger than the AT-LP60XBT: 435.6 mm wide, 374 mm deep and 5.0 kg.

Published specs

Bluetooth
Transmitter (to speakers and headphones); Bluetooth 5.2
Codecs, as published
aptX Adaptive and aptX on the product page; aptX Adaptive, aptX and SBC in the manual
Wired output
Yes: RCA, cable with a ground wire
Built-in preamp
Built in, switchable PHONO/LINE; 36 dB, RIAA equalized; PHONO 4.0 mV, LINE 252 mV (nominal at 1 kHz, 5 cm/sec)
Preamp switch for Bluetooth
Set the switch to LINE
Cartridge
AT-VM95C Dual Moving Magnet, on an AT-HS3 headshell
Replacement stylus
Any VM95 Series stylus (sold separately)
What you can swap
Yes: removable AT-HS3 universal headshell
Operation
Fully automatic
Speeds
33⅓ and 45 rpm
USB
None listed
Built-in speakers
None listed
Dust cover
Removable hinged dust cover
Size, as published
435.6 W × 374 D × 128 H mm
Weight
5.0 kg
In the box
Dust cover and hinges, felt mat, platter with belt, counterweight, AT-HS3 headshell with AT-VM95C, 45 rpm adapter, RCA cable (about 1.0 m), AC adapter (about 1.5 m)
  • Audio-Technica AT-LP3XBT product page (EU): Bluetooth version, codecs, wired output, built-in preamp, cartridge, replacement stylus, what you can swap, operation, speeds, USB (none listed), built-in speakers (none listed), dust cover, size, weight, what’s in the box, price on the maker’s shop. Checked 27 Oct 2026.
  • Audio-Technica AT-LP3XBT user manual: preamp switch for Bluetooth. Checked 27 Oct 2026.

Pick 2 · Simplest: press start and walk away

Audio-Technica AT-LP60XBT

Fully automatic

Press Start and the arm finds the record, plays it and goes back to its rest on its own. It sends the sound to Bluetooth speakers or headphones, or down the included cable, with a built-in phono preamp you can switch off.

Price on the maker’s shop: From €199 at Audio-Technica (EU shop), checked 27 Oct 2026. Prices change; the shop shows today’s.

illustration, not a photo
Drawing, not a photo: we found no photo of the Audio-Technica AT-LP60XBT with a license that allows reuse.

Why it suits this setup

  • Fully automatic: Audio-Technica’s manual says the arm returns to its rest when the record ends, and the Stop button sends it back early.
  • aptX as well as SBC, on both Audio-Technica pages and in the manual, so aptX headphones and speakers get the better of the two.
  • Built-in phono preamp with a PHONO/LINE switch: LINE for powered speakers or an AUX input, PHONO for an amplifier with its own phono input.
  • The stylus is replaceable: Audio-Technica names the ATN3600LC as the replacement and also offers the ATN3600LE.

Watch out for

  • The cartridge itself can’t be changed: Audio-Technica calls it integral, so only the stylus is replaceable.
  • Audio-Technica disagrees with itself on codecs: the European page lists aptX Adaptive, aptX and SBC; the US page and the manual list SBC and aptX only. Plan on aptX.
  • The cable in the box goes from a 3.5 mm plug on the turntable to two RCA plugs, so the turntable end isn’t a standard RCA socket.
  • Only 33⅓ and 45 rpm, and no USB.

Published specs

Bluetooth
Transmitter (to speakers and headphones); Bluetooth 5.0 on the US page and in the manual, not given on the EU page
Codecs, as published
aptX Adaptive, aptX and SBC on the EU page; SBC and aptX on the US page and in the manual
Wired output
Yes: RCA, through the included 3.5 mm-to-RCA cable
Built-in preamp
Built in, switchable PHONO/LINE; 36 dB, RIAA equalized; PHONO 2.5 mV, LINE 150 mV (nominal at 1 kHz, 5 cm/sec)
Preamp switch for Bluetooth
The manual doesn’t say
Cartridge
Integral Dual Moving Magnet cartridge; the manual names it AT3600L
Replacement stylus
Replaceable: ATN3600LC; Audio-Technica also sells the ATN3600LE
What you can swap
Stylus only: Audio-Technica calls the cartridge integral
Operation
Fully automatic
Speeds
33⅓ and 45 rpm
USB
None listed
Built-in speakers
None listed
Dust cover
Removable hinged dust cover
Size, as published
359.5 W × 97.5 H × 373.3 D mm
Weight
2.6 kg
In the box
Dust cover, felt mat, platter with belt, 45 rpm adapter, RCA cable (about 1.2 m), AC adapter (about 1.5 m)

Pick 3 · Manual with aptX HD

Pro-Ject T1 EVO BT

Manual

A manual deck with a heavy 8 mm glass platter and an Ortofon OM 10 moving-magnet cartridge, hand-made in Europe, says Pro-Ject. It sends aptX HD over Bluetooth 5.0, and the RCA output can be the built-in preamp (Line) or the bare cartridge signal (Phono).

Price on the maker’s shop: €499 at Pro-Ject (EU shop), checked 27 Oct 2026. Prices change; the shop shows today’s.

illustration, not a photo
Drawing, not a photo: we found no photo of the Pro-Ject T1 EVO BT with a license that allows reuse.

Why it suits this setup

  • aptX HD over Bluetooth 5.0, for headphones and speakers that list aptX HD too.
  • Ortofon OM 10 with an elliptical stylus; the replacement stylus is the Stylus OM 10, and any cartridge with half-inch mounting holes fits.
  • Two wired outputs: Line OUT through its own preamp, or Phono OUT for an amplifier with a phono input or a separate phono preamp.
  • Pro-Ject includes its Connect it Phono E RCA cable and a dust cover with adjustable hinges.

Watch out for

  • Manual: you lower and lift the arm yourself with the lift lever; Pro-Ject lists no automatic start or return.
  • aptX HD is the only codec Pro-Ject lists. With headphones that don’t have it, ask the maker what they fall back to.
  • The headshell is part of the one-piece arm, so changing cartridge means remounting it, not swapping a headshell.
  • Only 33 and 45 rpm, and no USB.

Published specs

Bluetooth
Transmitter (to speakers and headphones); Bluetooth 5.0
Codecs, as published
aptX HD (no other codec listed)
Wired output
Yes: RCA, Line OUT or Phono OUT
Built-in preamp
Built in, Line OUT or Phono OUT; 34 dB, 200 mV out at 1 kHz from 5 mV in (typically)
Preamp switch for Bluetooth
The manual doesn’t say
Cartridge
Ortofon OM 10, moving magnet, elliptical stylus
Replacement stylus
Stylus OM 10
What you can swap
Cartridge: any with half-inch mounting holes; the headshell is part of the arm
Operation
Manual: lift lever, no automatic start or return listed (our reading)
Speeds
33 and 45 rpm, electronic speed change
USB
None listed
Built-in speakers
None listed
Dust cover
Dust cover with adjustable hinges
Size, as published
415 W × 100 H × 335 D mm
Weight
3.8 kg
In the box
Dust cover, felt mat, power supply, phono/line RCA cable

Pick 4 · Step up: direct drive, aptX Adaptive, removable head shell

Technics SL-40CBT

Manual

A manual direct-drive deck with aptX Adaptive over Bluetooth 5.4, an Audio-Technica AT-VM95C cartridge on a removable head shell, and a built-in phono stage with a PHONO/LINE switch and separate Phono and Line sockets.

Price on the maker’s shop: £749 at Technics (UK shop), checked 27 Oct 2026. Prices change; the shop shows today’s.

illustration, not a photo
Drawing, not a photo: we found no photo of the Technics SL-40CBT with a license that allows reuse.

Why it suits this setup

  • Direct drive: Technics calls it a “direct drive manual turntable” and gives 0.7 seconds from standstill to 33⅓ rpm.
  • aptX Adaptive and SBC over Bluetooth 5.4, the newest Bluetooth version among these six.
  • Separate PHONO and LINE sockets with a PHONO/LINE switch: LINE for powered speakers or an AUX input, PHONO for an amplifier with its own phono input. The phono stage has 36.5 dB of gain.
  • The AT-VM95C sits on a removable head shell. Technics names the AT-VMN95C as the replacement stylus, and Audio-Technica says the AT-VM95C takes any VM95 Series stylus.

Watch out for

  • Manual: you lower and lift the arm yourself with the cue lever.
  • Bluetooth needs the switch on LINE. With it on PHONO, for an amplifier’s phono input, the manual’s troubleshooting says Bluetooth doesn’t work.
  • For a new cartridge, Technics says to fit the AT-VM95C again, because the arm height can’t be adjusted.
  • Only 33⅓ and 45 rpm, no USB, and 7.1 kg.

Published specs

Bluetooth
Transmitter (to speakers and headphones); Bluetooth 5.4
Codecs, as published
aptX Adaptive and SBC
Wired output
Yes: two RCA pairs, PHONO (with an earth terminal) and LINE
Built-in preamp
Built in, PHONO/LINE switch; 36.5 dB gain
Preamp switch for Bluetooth
Set the switch to LINE; on PHONO, Bluetooth doesn’t work
Cartridge
audio-technica AT-VM95C (moving magnet), on a removable head shell
Replacement stylus
AT-VMN95C
What you can swap
Yes: removable head shell; for a new cartridge Technics says to use the AT-VM95C
Operation
Manual
Speeds
33⅓ and 45 rpm
USB
None listed
Built-in speakers
None listed
Dust cover
Dust cover
Size, as published
430 W × 128 H × 353 D mm
Weight
7.1 kg (approx.)
In the box
Turntable mat, dust cover, EP record adaptor, balance weight, head shell with cartridge, PHONO cable, PHONO earth lead, AC power cord

Pick 5 · For digitising records: USB, and 78s too

Audio-Technica AT-LP120XBT-USB

Manual

A manual direct-drive deck with a USB output for recording records on a computer, all three speeds including 78, pitch control, and an AT-VM95E cartridge on a detachable AT-HS6 headshell. Bluetooth and the RCA output sit alongside the USB.

Price on the maker’s shop: From €399 at Audio-Technica (EU shop), checked 27 Oct 2026. Prices change; the shop shows today’s.

illustration, not a photo
Drawing, not a photo: we found no photo of the Audio-Technica AT-LP120XBT-USB with a license that allows reuse.

Why it suits this setup

  • USB to a computer at 16-bit, 44.1 or 48 kHz, with no driver needed, says Audio-Technica; the manual suggests free Audacity for recording.
  • Plays 33⅓, 45 and 78 rpm, with quartz speed lock and a ±10% pitch slider.
  • AT-VM95E on a detachable AT-HS6 universal ½-inch headshell: any VM95 stylus fits, and so does another cartridge.
  • aptX Adaptive, aptX and SBC over Bluetooth 5.0 on the current spec table.

Watch out for

  • Fully manual, says Audio-Technica: you cue the arm and lift it off at the end of a side yourself.
  • Set the preamp switch to LINE for Bluetooth and for USB, says the manual.
  • Audio-Technica’s 2020 manual lists only aptX and SBC; the current product page adds aptX Adaptive.
  • Heavy and large: 8 kg without the dust cover, 452 × 352 mm.

Published specs

Bluetooth
Transmitter (to speakers and headphones); Bluetooth 5.0
Codecs, as published
aptX Adaptive, aptX and SBC (Audio-Technica’s older manual lists aptX and SBC)
Wired output
Yes: RCA, cable with a ground wire; and USB
Built-in preamp
Built in, switchable PHONO/LINE; 36 dB, RIAA equalized; PHONO 4 mV, LINE 240 mV (nominal at 1 kHz, 5 cm/sec)
Preamp switch for Bluetooth
Set the switch to LINE (also for USB)
Cartridge
AT-VM95E Dual Moving Magnet, 0.3 × 0.7 mil elliptical, on an AT-HS6 headshell
Replacement stylus
AT-VMN95E; any VM95 Series stylus fits
What you can swap
Yes: detachable AT-HS6 universal ½-inch headshell
Operation
Fully manual
Speeds
33⅓, 45 and 78 rpm; ±10% pitch
USB
Yes: 16-bit, 44.1 or 48 kHz
Built-in speakers
None listed
Dust cover
Removable hinged dust cover
Size, as published
452.0 W × 352.0 D × 141.6 H mm
Weight
8 kg without dust cover
In the box
AT-VM95E on AT-HS6 headshell, USB cable (1.9 m), RCA cable with ground wire, counterweight, felt mat, dust cover, 45 rpm adapter, stylus target light, AC adapter

Pick 6 · All-in-one: speakers built in, Bluetooth in and out

Victrola Eastwood II

Speakers built in

A record player with its own amplifier and speakers in the base, so it plays out loud with nothing else. It also works both ways over Bluetooth: Vinyl Stream sends a record to a Bluetooth speaker or headphones, and Bluetooth mode plays your phone through its speakers.

Price on the maker’s shop: $149.99 at Victrola (US shop), checked 27 Oct 2026. Prices change; the shop shows today’s.

illustration, not a photo
Drawing, not a photo: we found no photo of the Victrola Eastwood II with a license that allows reuse.

Why it suits this setup

  • Nothing else to buy: the speakers are in the cabinet, and one illuminated knob runs everything, as Victrola describes it.
  • Bluetooth both ways, as Victrola lists it: in, to play a phone through its speakers, and out, to send a record to a Bluetooth speaker or headphones.
  • An Audio-Technica AT-3600LA moving-magnet cartridge; Victrola’s stylus guide gives the ATN3600L as its replacement stylus.
  • Three speeds, including 78, plus a headphone jack and an RCA output for a stereo later.

Watch out for

  • Victrola publishes no Bluetooth codec and no speaker power.
  • No phono/line switch is listed: the manual labels the RCA socket a line output, so it goes into a line input such as AUX, not a phono input.
  • Manual operation: you lower the arm yourself; the manual shows an auto-stop switch for the platter.
  • Built from MDF and plastic, Victrola says, and it weighs 2.27 kg.

Published specs

Bluetooth
In and out (receiver and transmitter); Bluetooth 5.1
Codecs, as published
not published (no codec list)
Wired output
Yes: RCA and a headphone jack
Built-in preamp
Built in (it plays through its own speakers); no gain or switch published
Preamp switch for Bluetooth
No Phono/Line switch listed
Cartridge
Audio-Technica AT-3600LA, moving magnet
Replacement stylus
ATN3600L, per Victrola’s stylus guide
What you can swap
not published
Operation
Not on the product page; the manual shows a lift lever and an auto-stop switch
Speeds
33⅓, 45 and 78 rpm
USB
None listed
Built-in speakers
Built in; power not published
Dust cover
Removable dust cover
Power
DC 5 V, 1.0 A adapter
Size, as published
32.6 L × 30.7 W × 11.5 H cm
Weight
2.27 kg
In the box
not published
  • Victrola Eastwood II product page: Bluetooth version, codecs (not published), wired output, built-in preamp (not published), preamp switch for Bluetooth (not published), cartridge, what you can swap (not published), operation (not published), speeds, USB (none listed), built-in speakers, dust cover, size, weight, what’s in the box (not published), power. Checked 27 Oct 2026.
  • Victrola stylus guide: replacement stylus. Checked 27 Oct 2026.
  • Victrola US shop: Eastwood II, black: price on the maker’s shop. Checked 27 Oct 2026.

Side by side

TurntableOperationCodecsPreampSpeedsUSBSize, as publishedWeightCable in the box
Audio-Technica AT-LP3XBTBest overallFully automaticaptX Adaptive, aptX (manual adds SBC)Switchable, 36 dB33⅓, 45None listed435.6 W × 374 D × 128 H mm5.0 kgRCA with ground, about 1.0 m
Audio-Technica AT-LP60XBTSimplest automaticFully automaticaptX, SBC (EU page adds aptX Adaptive)Switchable, 36 dB33⅓, 45None listed359.5 W × 97.5 H × 373.3 D mm2.6 kgRCA, about 1.2 m
Pro-Ject T1 EVO BTManual, aptX HDManualaptX HDLine or Phono OUT, 34 dB33, 45None listed415 W × 100 H × 335 D mm3.8 kgRCA (Connect it Phono E)
Technics SL-40CBTDirect drive, aptX AdaptiveManualaptX Adaptive, SBCSwitchable, 36.5 dB33⅓, 45None listed430 W × 128 H × 353 D mm7.1 kg (approx.)PHONO (RCA) cable and earth lead
Audio-Technica AT-LP120XBT-USBUSB and 78 rpmFully manualaptX Adaptive, aptX, SBCSwitchable, 36 dB33⅓, 45, 7816-bit, 44.1/48 kHz452.0 W × 352.0 D × 141.6 H mm8 kg without dust coverRCA with ground; USB 1.9 m
Victrola Eastwood IIAll-in-oneNot published; lift lever in the manualNot publishedNo switch listed33⅓, 45, 78None listed32.6 L × 30.7 W × 11.5 H cm2.27 kgNot published

Everything as the maker publishes it, checked 27 Oct 2026. Makers give sizes in different orders; each is labelled.

How we picked

  • One clear setup per pick: the best all-rounder (an automatic with aptX Adaptive and a headshell to swap), the simplest automatic, a manual deck with aptX HD, a direct-drive step up with aptX Adaptive, recording records to a computer, and an all-in-one with its own speakers.
  • Bluetooth out first. Then which codecs, the wired output and its preamp switch, the cartridge and stylus, automatic or manual, speeds, USB and what comes in the box.
  • Specs from the maker. Every number on this page comes from the maker’s product page or manual, checked on 27 Oct 2026 and linked under each pick. Gaps are marked “not published”. Where a maker’s own pages disagree, we show both.
  • On sale today. On 27 Oct 2026 Audio-Technica’s European store listed all three Audio-Technica picks with a price, Pro-Ject’s shop offered the T1 EVO with its BT option (Pro-Ject), Technics’ UK shop showed the SL-40CBT in stock, and Victrola’s US store listed the Eastwood II for sale. Beside the maker, each pick links to retailers whose page for that exact model we opened that day. Thomann listed none of the six.
  • Prices from the maker’s own shop. Each price is the one the maker’s shop showed for that model on 27 Oct 2026: the European shop in euros where the maker sells direct in the EU, otherwise its UK or US shop, named with its currency. Never a retailer’s price. Prices change, so the shop link shows today’s.

We have not listened to or measured these turntables for this guide, and we don’t give scores. Where Max has used one himself, his notes will appear under that pick. The full method is on How we pick.

Not published by the maker:

  • Audio-Technica AT-LP60XBT: which preamp switch setting to use for Bluetooth
  • Pro-Ject T1 EVO BT: which preamp switch setting to use for Bluetooth
  • Victrola Eastwood II: codecs, built-in preamp, what you can swap, operation, what’s in the box

Considered but left out: Cambridge Audio Alva ST (archived on all Cambridge Audio region pages, checked 27 Oct 2026); Audio-Technica AT-LP70XBT (automatic with aptX Adaptive, but Audio-Technica says its cartridge cannot be removed and its EU store showed it out of stock; the AT-LP3XBT adds a removable headshell); Sony PS-LX310BT (fully automatic with a gain switch, but Sony’s UK product and specification pages list no Bluetooth codec or version); Pro-Ject Juke Box E1 (an amplifier with a Bluetooth receiver: it plays your phone through your speakers, but Pro-Ject lists no Bluetooth output to send a record to headphones); Pro-Ject E1 BT (aptX HD and aptX Adaptive, but Pro-Ject’s own shop now sells the newer E1.2 in Standard, Phono and Clear versions only, and its product page and manual name different cartridges); Cambridge Audio Alva TT V2 (aptX HD with a direct drive and a high-output moving-coil cartridge, but Cambridge Audio’s page lists it as archived, checked 27 Oct 2026); Cambridge Audio Spira (new, with a removable headshell, but Cambridge Audio lists only “Bluetooth: Yes”, with no codec).

Questions

Can I send a record to my phone, TV or laptop?

No. A Bluetooth turntable sends to Bluetooth receivers: speakers, soundbars and headphones. Sony says TVs, smartphones and computers can’t receive its turntable’s stream.

Will aptX HD work with my headphones?

Only if your headphones list aptX HD too. If they don’t, the pair uses a codec both have: Cambridge Audio’s earbuds fall back to standard aptX with an aptX HD source.

Do I need a phono preamp?

Not for Bluetooth: five of the six list a built-in preamp, and the Eastwood II plays through its own speakers. For the wired output, set the switch to Line and use any line input. With the switch on Phono, you need an amplifier with a phono input or a separate box; our phono preamps guide picks six.

Can I play through Bluetooth and wired speakers at once?

On the Audio-Technica picks, yes: their manuals say the sound comes out of both if the wired equipment is left on, and suggest turning on only the one you want to hear.

Which one can I record records to a computer with?

The AT-LP120XBT-USB, over USB at 16-bit and 44.1 or 48 kHz. For any other turntable, a phono preamp with USB does it; our phono preamps guide has one.

Can I play 78s?

The AT-LP120XBT-USB and the Eastwood II list 78 rpm. The other four play 33⅓ and 45 only.

Do I need Bluetooth at all for headphones?

No: wired headphones work from an amplifier’s headphone jack or a headphone amp, with no codec in the way. Our vinyl headphones guide walks through that chain.

Pictures and sources